China UPVC Window Engineering Factory
WWW.ZCWINDOW.COM
Series Cross section Glass
Colour
The above color and texture is the most common type, of course, you can also customize the color and texture according to the needs, and the color can be used on one side of the plastic steel material, you can also use the same color of the entire material, also support the indoor and outdoor two colors of customization, the line also supports the color customization, customization may incur additional costs, And in general, there is a minimum quantity requirement for customization.
Texture
| The plastic steel profiles we use use ASA co-extrusion process, and its profile properties are as follows: | ||||||
|---|---|---|---|---|---|---|
| tensile strength MPa | elongation at break | tensile yield strengthKJ/m2 | Size changes after heating | welding stress MPa | ||
| 37.76 | 104 | 619 | R=1.64 | ΔR=0.21 | 40 | |
| Material performance data： | ||||||
| specific gravity g/cm3 | tensile strength MPa | tensile modulus MPa | Elastic yield strength MPa | Elastic yield modulus MPa | ||
| 1.06 | 42 | 1910 | 59 | 1830 | ||
| notch impact strength 23℃（J/M） | notch impact strength 23℃（J/M2） | Low temperature notch impact strength-30℃（J/M2） | vicat℃ | |||
| 195 | 13 | 7 | 90 | |||